SATA RAID Adapters
  SAS RAID Adapters
  Mezzanine Board
  SAS Non-RAID Adapters
  External RAID CTRL
  JBOD/Expander Box
  RAID Subsystem
  Desktop RAID
  Rackmount RAID
  ARC-71xx series
  ARC-72xx series
-- ARC-9200 series
  Fibre to SAS
-- SAS to SAS
  iSCSI to SAS
  Internal RAID Rack
  Thunderbolt Solutions


> Products > RAID Subsystem
      > ARC-8042-12 > ARC-8050U3-6
      > ARC-71xx > ARC-72xx > ARC-9200

Relatived Resource  
ARC-9200 Manual
ARC-9200 Installation Guide




(12Gb/s SAS-to-SAS 1U RAID Head)

ARC-9200 1U RAID head supports flexibility interface configuration; 8 x 12Gb/s SAS ports, 2/4 x 16Gb/s fibre channels or 2 x 10Gb/s iSCSI channel host and 8 x 12Gb/s SAS ports expander for performance and easy expansion. When used with 12Gb/s SAS expanders, the controller can provide up to (256) devices through one or more SAS JBODs, making it an ideal solution for enterprise class storage applications that called for maximum configuration flexibility.

The RAID head raises the standard to higher performance levels with several enhancements including new high performance 1.2 GHz dual core ROC processor, a DDR3-1866 memory architecture and high performance PCIe 3.0 interface bus interconnection. Each controller includes one 204-pin SO-DIMM socket with default 2GB upgrade to 8GB DDR3-1600, 1RX8/2RX8, ECC SDRAM.




  Host Interface
  12Gb SAS-to-SAS
  2 x SFF-8644 external connectors
  8 x 12Gb/s SAS ports (4-ports per connector)
  Drive Interface
  Up to 512 12Gb/s SAS or 6Gb/s and 3Gb/s SAS/SATA
    HDDs/ SSD, using 12Gb/s SAS JBOD
  Dual downstream SFF-8644 (4 x 12Gb/s) expansion
    connectors per controller
  System Architecture

Dual core RAID-on-Chip (ROC) 1.2GHz processor
  One 204-pin DIMM socket for 2GB (default)
    DDR3-1600, 1RX8/2RX8, ECC module
--  up to 4GB or 8GB DDR3-1600, 1RX8/2RX8,
 Unbuffered/Registered ECC module
  Dual downstream SFF-8644 (4 x 12Gb/s) expansion
    connectors per controller
  Supports up to 512 12Gb/s SAS or 6Gb/s and 3Gb/s
    SAS/SATA HDDs/SSD, using 12Gb/s SAS JBOD
  Redundant controller operation with active/active
    and fail-over/ fail-back function
  Dual-active RAID controller with cache mirroring
    through dedicated high speed bus
  Advanced configuration for video optimized
    performance settings
  Support flash-based or battery backup module
    (FBM/BBM) ready (optional)
  RAID Features
  RAID level 0, 1, 10(1E), 3, 5, 6, 30, 50, 60, Single
    Disk or JBOD
  Multiple RAID 0 and RAID 10(1E) support (RAID 00
    and RAID 100)
  Automatic drive failover and detection and rebuild
    using multiple Global, D edicated or Enclosure hot-
    spare drives
  Multiple pairs SSD/HDD disk clone function
  SSD automatic monitor clone (AMC) support
  SED (Self-encrypting drives) function support
  Support for native 4K and 512 byte sector devices
  Support HDD firmware update
  Hot-swap and redundant components for increasing
  Automatic synchronization of firmware version in the
    dual-active mode
  Multi-path & load-balancing support (MPIO)
  LCD Control Display Panel for setup, alarm mute and
  System Status indication through LCD, LED and
    alarm buzzer
  SMTP support for email notification
  SNMP support for remote manager
  Enclosure management ready
  RAID Management
  Field-upgradeable firmware in flash ROM
  Firmware-embedded manager via RS-232 port
  Embedded browser-based RAID manager via built-in
    10/100 Lan port
  Access terminal menu by telnet via a LAN port
  API library for customer to write its own monitor
  SAP monitor utility easily manage multiple RAID units
    in the network
  Operating System
  OS Independent
1U 19-inch rackmount chassis (H x W x D)
• Without handles:
   43.5 x 445 x 400 mm (1.7 x 17.5 x 15.7 in)
• With handles:
   43.5 x 482 x 436 mm (1.7 x 22.9 x 17.1 in)
• Single: 6.9 kg (15.21 lb)
• Dual: 7.8 kg (17.2 lb)
Operating Temperature: 0°c ~ 40°c
Humidity: 10~80%, non-condensing
Storage Temperature: -40°c to 60°c
Humidity: 5~95%, non-condensing
  Electrical Requirements
Power Supply
• Dual 270W hot swap and redundant with PFC, N+1 design
• AC voltage: 110V@40A, 230V@80A for input inrush current with PFC (auto-switching)
• Supports 90-264 VAC input at 47-63 Hz frequency
  Optional Prouduct - Accessories
  Flash-based Back-up Module
ARC-1883-CAP ARC-1883-BAT
Legal InformationPrivacy PolicySitemapContact Us
Copyright © 2017 Areca Technology Corp. All rights reserved.